Can-Am Maverick 1000R X rs Makes Racing Debut at WORCS Round 1
Published Feb. 04, 2013 0 Updated Feb. 04, 2013
James Hill rode his Can-Am Maverick 1000R X rs to a sixth place finish in the SxS Pro Production class.
The opening round of the 2013 WORCS series at Canyon MX in Peoria, Ariz. marked the competitive debut of the Can-Am Maverick 1000R X rs.
Dismal track conditions, which included deep mud, standing water and wet sand in additional to the normal desert obstacles, made for a challenging start to the 2013 season. Two Can-Am racers, James Hill and David Martinez, posted top 10 finishes in the SxS Pro Production class in their Maverick 1000R X rs vehicles.
“Unfortunately, the weather did not cooperate and the overall event became a real race for survival in the mud and deep, standing water. In its competition debut, the Can-Am Maverick 1000R side-by-side vehicle’s top finish was sixth, though we competed in the lead pack early on,” says Jimmie O’Dell, race manager, Can-Am. “We are very optimistic for the upcoming events, as all the drivers are thrilled with the performance and handling of the Maverick on the race course. We all realize that it is a long season and we are carrying a positive attitude about the eight rounds of WORCS racing that remain.”
Hill (IMG Racing) finished in sixth place out of 23 competitors in the side-by-side Pro ranks. He battled through the muck, coming from 19th after the first lap to find a spot in the top 10 by lap five. He picked up two more spot on the final lap. Martinez, of Del Amo Motorsports / Murray Motorsports, finished the day in 10th.
After a good start, Motoworks / Can-Am Pro Josh Frederick was in third place in the class in his Maverick 1000R X rs. Soon after that he, and roughly a dozen other racers, missed a turn and dropped a few positions. Frederick eventually got back on the race course and recovered to climb into the top five during the first two laps. However, his day ended with an aftermarket drive belt failure during lap three.
The muddy conditions weren’t much kinder to Frederick on his Motoworks-tuned Can-Am DS 450 in the ATV Pro class. Frederick got off the line late and was in ninth after the first lap. One lap later, he had moved into sixth place and had his sights set on the top five racers. However, a short time later Frederick noticed his machine was losing power and he chose to pit to correct a loose exhaust. Once fixed, he re-entered the race at full power and attempted to catch with the top five. However, he ran out of time and had to settle for sixth.
“I am so excited and so ready for this year. It is already way better with the Maverick 1000R this year, and the Maverick is nearly stock,” says Frederick. “Monday was the first time I drove this Maverick. We did a little testing with FOX on Tuesday. I was really excited coming into this weekend. The more seat time I get, the better we’ll be.”
Finishing in the seventh- and eighth-place positions, respectively, were Team GPS / Can-Am Pros Webster Collins and Dillon Zimmerman.







2021 Yamaha Wolverine RMAX2 1000 vs. Polaris General 1000 Deluxe: By the Numbers
2021 Arctic Cat ATV and UTV Lineup
2021 Yamaha Wolverine RMAX2 1000 and RMAX4 1000 Unveiled
2021 Polaris Ranger, RZR and General Lineup Unveiled
2021 Honda Talon 1000X vs. Kawasaki Teryx KRX 1000 vs. Yamaha YXZ1000R: By the Numbers
2021 Polaris Sportsman 570 Ultimate Trail LE Review
2021 Can-Am Outlander 650 DPS vs. Suzuki KingQuad 750AXi Power Steering: By the Numbers
2021 Polaris Sportsman 450 H.O. vs. 2021 Honda Rancher 4x4: By the Numbers
2021 Polaris Sportsman 570 and 450 H.O. Unveiled: Everything You Need To Know
10 Best Polaris RZR Accessories
Into the Wild: 5 Extreme Places You Can Go with ARGO
Best Can-Am Maverick Doors
Best UTV Speakers for Off-Road Music
Snow Problem: Conquer Winter with a Snow Plow from Moose Utility Division
Best ATV Hunting Accessories
6 of the Best Covers for ATVs and UTVs
Basic Wiring Tips for ATVs and UTVs

Can-Am Racing Report: WORCS Round